Hi All,
I have complete my DIY RV Lifepo4 build. I have watch many videos and research quite a few DIY Solar forum posts. But I have not been able to locate a comprehensive guide to required configurations for the Daly BMS and The Triron Epever charge controller. I thought I understood what all...
As requested, below are the BMS and Charge controller settings I have been using. Seems to work fine after one season. If you think it needs adjustment, please comment. I have built 2 more similar batteries for friends and family, then have different charge controller systems, but I provided...
Hi all,
I am new to this forum and have spent the better part 2020 reading and watch Youtube videos on RV mods. I have focused on solar and Lithium batteries. Getting ready to break free from the home office.
I am planning 400-800 watt of solar power. Starting with existing lead acid batteries...
I have a similar setup with 304ah. See this post https://diysolarforum.com/threads/eve-304-lifepo4-4s1p-12-volt-rv-build-and-config-with-epever-solar-cc-and-daly-bms.38352/#post-488660
Wow! Thanks all the great info and the quick response.
@DThames I live in BC Canada so idea conditions are rear. July-Sept maybe. This config is to get me started and I will likely expand. My plans allow for 800W. CC is capable of 1050W with 24V batteries. Still debating 12 vs 24.
@Pappion...
I have a follow up Solar and Lifepo4 battery question: While the trailer is at home and not being used, should my solar be turned off as there is very little daily draw so the battery remains close to full. Note: current full charge is 13.7V and SOC shows as 99%. Individual cell are at 3.425V...