beckkl's latest activity

The password for the .apk for the BMS version 3.0 is not 111111, it is seplos111

FYI, I stumbled across this video on youtube. It looks like the under temperature protection will turn on the heating fet....... after...

You can do a lot of things. Just was trying to figure it out using the BMS as-is, as it is supposed to be able to handle it. Turns out...

Well, well well. After doing some youtube searching, it looks like someone recently discovered that the BMS CAN heat with the charge...

No worries. I'm hoping that is what they eventually do. It seems like they didn't think beyond adding the heaters to help keep battery...

I'm starting to question if you are reading my replies carefully. The example you provide is not reproducible with a Seplos BMS. You...

I have solar assistant configured + home assistant, so can adjust the max charge amperage based on temp. But it is sort of irrelevant...

Am I missing something? My concern is that early in the morning I will be charging frozen batteries for a time. See this post...

Correct, it is an off-grid property. That is good to know about the efficiency of the insulation + heaters. I am hoping to need < 1KW...

Because in the morning I can't preheat the batteries before charging.

Others with the seplos BMS have confirmed, there is no combination of parameters that can be entered in the BMS to allow it to heat...

Just seeing this thread. Wondering what the though it is on charging Eve 304AH cells at say, .02C when below freezing. I just built a...

I ended up just splicing the switch wire and wiring up to a Shelly relay/dry contact. Ended up being pretty easy.

Ha! I had no idea such a thing existed.

For 3) So, if your turn on Power Save mode via Solar Assistant when there is a load, it will just turn off, then turn back on? Or are...

The issue is that I do want to be able to turn it on and off. I'll have some POE cameras that I'd like to be able to access should the...

I'm currently putting together my 48V system for a remote property, which is a seplos DIY battery kit and an EG4 3000 AIO. I am...

The password is seplos111

The password is seplos111

So, if for some reason you can't connect to the PC software, this battery cannot be managed? WTF