Hi All, I just bought 2 of these 320A 16S BMS on eBay. I just received them and wow, how can (4) 12 gauge wires in parallel handle 320A at 48 volts?
Also what I received is not the same as what is shown in the picture. The picture shows 2 wires coming out of each side (that are bigger than 12...
Hi All,
I am brand to having a system installed and just learning as I go. My system was just installed yesterday with 22 REC360AA Black panels with Enphase IQ7Plus-72-2-US micro-inverters and an Enphase combiner.
In the event of a long term power outage, I want to be able to unhook the power...
Ok and I just measured the wires on each side of the BMS are aprox 5 inches long. Do I count the length of both the in and the out from the BMS?
Also I have ordered 32 Lishen 3.2 volt 280ah cells to make (2) 16s 48 Volt banks. My plan is to use one BMS per 48 volt bank. (yes I know I could have...
Hi All, I am ready to pull the trigger on a Growatt 48V 6000T or 12000T but I want to confirm it does AC Coupling and Frequency Shifting with my grid tied system.
I just had installed 22 REC 360 Watt panels with Enphase IQ7+ micro inverters and this system is grid tied. I want to make sure...
I just purchased the 12000t and I am confused about the AC input and output. It seems to me if I connect them both to the same panel I would just have an inefficient loop.
My setup so far is 26 REC 360 watt panels connected to Enphase lq7+ micro inverters on a grid tied system. That system...
I picked up the Growatt 12000T today from watts247.com (Ian is an hours drive from me so I drove down and picked one up). I will be using the Growatt 12000T to keep the grid tied system running when the power is off.
I did find out the 12000T does do AC Coupling but does not do Frequency...