Hello All, The firmware update solved both the issues I was having. 1. unable to parallel inverters and 2. stop the inverter auto power-off once every day.
Thank you all for your advice.
Hello Don.
Thank you for your suggestions.
The power off and restart of the inverter happens around 5am (5:00-5:05) meaning load is not a issue. The power off is on average happening 6 out of the 7 day in a 1 week period. The 1 day a week on average the inverter does NOT power down does not...
Sure.
I followed the book for the actual parallel wiring. If you are asking about the ports because they are not properly designated here is what worked for me
1. Bottom left port of master for BMS. Top middle port for master outgoing communication. Top middle port into slave
2. After the...
Hi NCSolar. To be clear when in "off grid" application there is or is not a setting or work around to prevent this from happening? Thanks again for your comment.
Due to concrete walls and the inability to fish new wires to the panels, I chose to feed the PV system in where the meter used to be. All current is designated on Load 1 (critical load) and I am not using load 2.
Hello,
We are desperate. We have purchased Chinese brand inverters. The inverters stop sending all current every day for only a minute or two. I suspect this is due to a self diagnosis, or maybe not! Because we are off grid all appliances and other devices that are operating at that time are...
Pollenface; That is very interesting. I will address this as it may be the rising sun coming over the distant building at 5am and abruptly hitting the panels. I will keep you posted thank you.
Don B; As stated above this was "my best guess" as I am not an inverter technician. Agreed the...
I suspect the operational menu is the same but I am unable to locate a user manual for either brand. Yes I have reached out to the manufacturer as these were bought directly from the factory. Because the Amensolar owners manual does not correspond with digital menu I am lost. The sales team have...