Hello all, I just was following along on this thread after finding it on Google, because I’m having some similar issues. I have the 10,000 W hybrid inverter from Sungold, and 6 of their 100 amp power 48 V batteries. I am seeing error 58 (BMS Communication Fault in the manual) on my Inverter...
I cannot change number 6, it will not let me…it’s defaulting to SNU. Apparently I need to be in bypass mode, which I know nothing about x Also, I don’t even see SUB as an option. Did you mean CUB?
Kenny, you had previously shared with me what your settings were (see photos). I want to charge my batteries with my generator. What settings do I need to change (and to what) in order to do this? Thanks!
I can’t find those posts, maybe it wasn’t you. But yes, I need to charge my batteries using my generator, via the ac input on my inverter. I’m assuming some of my parameters in the inverter need changed, because I wired the ac input to the generator, but it didn’t start charging the batteries...
I can’t find those posts, maybe it wasn’t you. But yes, I need to charge my batteries using my generator, via the ac put on my inverter. I’m assuming some of my parameters in the inverter need changed, because I wired the ac input to the generator, but it didn’t start charging the batteries like...
I’d like to set it up where I can start the generator if the batteries get low. I only temporarily have 10 panels hooked up, using the “solar first” settings, so when the RV is running the a/c and whatnot, there’s not enough juice to power the rv AND charge the batteries too.
I made all of these changes, and as I had an error before I even started, it is still there. I did put the communications cable into the “RS485 A”port, and all subsequent connections between batteries into the B and C, as was suggested, but that did not change anything, the error is still there
I have 48v 100 Ah Lithium Iron Phosphate batteries with the sungold 10kw inverter. I have my battery type set to “user” because there in no preset for lithium. Would these values be good for me also? I’m not connected to the grid. Thanks.