This is my first system and I need to know what fusing is nessisary for a 4 x 100w panels with 4 100 ah agm batteries and 30 amp charge controller and a 1500 watt pure sine wave 24 volt inverter. Thanks
Thank you so much. Very helpful. I’m actually building two systems, one the 4 agm 100ah’s 4x 100w panels and my little trailer build with 2 100ah lithium iron and 1 395 w panel. Both 24 volt
Hi again. I now have 2 x 200 ah 24 volt life04 batteries and would like to know if, as I’m wiring them in parallel, positive to positive, negative to negative and then positive from battery A to bus bar and negative from battery B. Do all the wires have to be the same length? Also how would you...
Yes I am now building 2 systems one for my trailer (10ft) and one for my house. I have 2 x 100 ah life04 batteries and I have 2 x 24 volt 200ah batteries for the house.
I’ve ended up with a 30 amp tracer mppt and a Victron 100/50 and an eco worthy 3000 watt hybrid inverter all 24 volt and I...
Hi first post ever. I’m looking for a chart that would allow me to enter my components and get help with fusing and cables sizes. Does such a thing exist?
Hi I’m brand new to solar and am just now beginning to build a system. I just purchased a 12000 btu Rheem mini split heat pump and was wondering if it is feasible to run it with Solar power?
Thank you
Hi I was watching Wills video of his 24 volt system with 4 x 100 ah batteries and a 2000 w inverter and a 40a cc. I am building a very similar system which contains 4 x 100 ah batteries wired to 24 volts (ssp) with 4 x 100w solar panels 18. And 5 roughly and I want to know if it’s safe to use...
So am I correct in my calculation that with
2 12 volt 100ah batteries wired in series would be 24 volts 100 amps and 1200 watts then another 2 12 volt batteries also in series and then the 2 series banks wired in parallel would be 24 volts 50 amps and 2400 watts?
Hello again well before I even got the arm batteries hooked up I bit the bullet and bought 2 24 volt 200 ah life04 batteries and a 3000 watt 24 volt hybrid inverter I will have 2 400 watt panels with plans to expand. Can anyone help me with the fusing for this setup?
Thank you
Sorry. I get it now. Do you know where I can find a wiring diagram that allows you to plug in the values of your components and it will give you fusing and wire gauge’s nessisary?
I bought one today for 400. Canadian second hand unused. I’m doing the exact thing here in my shed workshop at beautiful Cultus Lake BC. I’ll watch this feed to see if I can learn anything. Thanks
I was thinking of getting a Victron battery protect for between the battery and inverter. Would the 100 amp model work for that? And would it go before or after the positive buss bar? Thanks