Recent content by Bursu

In order to prioritize the use of PV - Battery - and Grid as last resort, and no charging using Grid, go to System Work Modes - Time Of Use, and just enable Time of use. Untick everything else under Grid or Gen. That's it

I had a pretty good experience with Pytes support in November. I own eight 48100R-C Pytes batteries, which were purchased at different times and had three different firmware versions. To address this issue, I reached out to them via email, and they promptly provided me with latest firmware, a...

I will assume the inverter and batteries are not in the open, on the exterior wall, but in a room or shed, away from moisture from rain and snow. In general, as long as the inverter is 24/7 online it will permanently generate heat enough to be safe from such low temperatures even in a cold room...

I generated 10.4 - 10.85 kw for about 30 minutes on 25 April, with the 12kw Deye. The maximum consumption i saw was 3.5kw was the load and 7.2kw went into batteries. I was cooking on induction and baking at the same time

On Deye's site the recommended smart meters for three phase inverters are Eastron SDM630 Modbus V2 and CHINT DTSU666. However others work too because Modbus communication protocol is a common standard.