It seems that when I recalibrate the readings it goes away. The voltage shown wasn’t correct so I manually reset it with my voltmeter by getting a reading for each battery and inputting that number and the error went away. All my power came back on as well, it had died.
HELP! What is a “front detection IC error???” It’s keeping me from turning on my inverter. I can clear the other two messages because my batteries have been top balanced. Once I manually calibrate the voltage they will go away. I don’t know what this error is to clear it. I know that this works...
Great news to end this thread, the voltage recalibration allowed the over voltage alarm to go away, the inverter kicked on and I have all my power back!!
Thank you to everyone who helped me from day one starting a few weeks ago knowing nothing about this system till now!
This forum rocks @Will...
So I would assume I can’t get the inverter to come on because of the over voltage protect alarm. It does work, I tested it momentarily by plugging it up directly to the battery a week ago. But everything is wired correctly now with the BMS in between.
What would my other option be to add a...
Okay. I just need to see how to do that. I understand it, I just don’t know how to do it fully so let me find a video really quick unless you have a suggestion?
I have great news, my BMS is working! I reviewed my overkill manual on how to calibrate it and it’s back working! I see that one of my batteries is over voltage while the others have drained since I top balanced them days ago. I have questions on what to do next as I’m currently connected in...
The BMS was working so I’m definitely not purposely charging without it. It’s connected but I don’t know why it’s not working anymore. The power supply is about to stop charging the batteries and I’m repeatedly monitoring as well.
Thank you for the link, I will check it out.
Yes, I am optimistically thinking that is what’s happening also, the BMS is doing its job! My batteries are wired correctly but my BMS is showing incorrect readings. Is there a way to reset it? I tried shorting the negatives coming out of both ends of the BMS but that didn’t work. Saw it on a...
Here we are ten days later and I think I’ve figured out my issue. Solar panel tech said I needed a new inverter. Power was going in but none coming out. So before I bought one, I plugged it directly to the lithium batteries and bypassed the BMS. The inverter came on ??
Crazy thing is, my BMS...
I may not fully understand but if I’m following you, nothing works right now because my entire system is dead. The all-in-one won’t even come on the way it’s connected at the moment. And I do understand why you say separate components would be better here.
Got it! it got dark on me and I’ve...