My eg4 6000ex powers my dryer no issues 5800w 3000w on one line and 2800w in the other, can dry 5 loads on a sunny day but I need to turn off the grid input in the inverter if not it will draw all power from the grid
I did new settings, same issue higher bat voltage, I tried every setting unsuccessfuly, I think I have to set up everything like it was before connecting back my eg4 6000ex that wasn't reliable but it didn't want to damage my batteries
I'm tired of being to be monitoring this inverter to see if it's not messing up, one day is not going to grid when batteries low the other takes power from grid for no reason, this morning began charging from the grid for no reason, have to reboot it to get it going normally again, looking for...
Having issues with my 6k xp charging battery when on grid but the ac charging was disabled, it shows 65 watts about 1.5 amps but slowly gets the voltage high enough to get the batteries online then cycles every 20 minutes from grid to off grid, called signature solar and they set it up telling...
Having issues with my 6k xp charging battery when on grid but the ac charging was disabled, it shows 65 watts about 1.5 amps but slowly gets the voltage high enough to get the batteries online then cycles every 20 minutes from grid to off grid, called signature solar and they set it up telling...
Hi, I have 9 solar panels aiming south and I want to know if i can set 9 panels aiming west because in the afternoon is when everyone gets home and the batteries began discharging, can I connect them in parallel with no issues or need blocking diodes?
I called signature solar to ask if I can substitute a 6000ex with a 6000xp and she said is not apples to apples to compare them and is strictly off grid, but in the manual I see the grid bypass, please help me take a decision