Recent content by cgccpres98

Well, I found the problem and it's not the inverter. I had a parasidic draw in my main panel. I eliminated the circuit and everything is back to normal. I am very happy with the inverter.

I have been using a Deye 8kw split phase ( for USA model) inverter for over a year with no problems. I use it as a grid back up system. Recently I started charging my DIY Eve batteries at night when the price of energy is cheaper. I noticed recently that at idle with the AC side powered and no...

Here is what the USB selection under the tab setting...battery looked like for my setup.

I just got mine working a few minutes ago on a Deye inverter. I use a 4 port USB hub with it's own power supply. I tried a hub without power and it wouldn't work. I'm using a Pizero so I'm not sure if the RPI4 has enough power for the USB devices. I had trouble seeing both Overkill BMS so I...

The most recent Beta version allows multiple JBD bms at once. From SA website: 2022-03-02Beta New features: Support for multiple Daly and JBD BMS connections.

How do you connect the inverter to the raspberry pi? I have a Deye hybrid inverter and the raspberry pi, but I'm not sure what cable to use to connect the two together. Can you recommend a cable?

You folk on this forum are AMAZING! Thanks for all the help so far! I assembled the battery quickly so I could test the inverter, the ANT BMS, and to see how everything goes together. I guess I am a glutten for punishment knowing I would have to reassemble everything! Last night I took the...

I assembled a large battery bank of 32 280ah cells. It is configured in 2p16s. I have an ANT BMS rated for 300 amp 180 continuously. According to the BMS I have a total voltage of 52.6v, but if I put and actually volt meter in the total + and - terminal I get about 115v. Shouldn't the total...