I have the MPP Solar PIP-1012LV-MS. 200aH LiFePO4 and 12v hub
Is it okay to put all positives to bus bar and all grounds to a bus bar (with ground also going to chassis)??
I have all the breakers and wire gauges worked out but not sure with AIO units if this would be the approriate grounding...
Sorry not sure what you mean exactly.
Are you say the SCC, BAT to (+) bus and then connect SCC directly to BAT (-)
Then 12v Hub to (-) BUS which goes to chassis ground
and thanks for tip on breaker!
I have the MPP Solar PIP-1012LV-MS. 200aH LiFePO4 and 12v hub that I am trying to get installed in my van
Is it okay to put all positives from those components to bus bar and all grounds to a different bus bar (with ground BUS also going to chassis)??
It being AIO wasnt sure and documentation...
I had not considered connecting the a/c to any chassis as the AIO unit has pv in, ac inverter and shore power in as well as battery. I was planning to use the bus bars for the battery +/- to bus bars and the aio instead of going to battery go to bus bars and 12v go to bus bars but then also...
Hello new here I just bought the above unit recommended by will with (2x) 200w panels and 12v 200Ah LiFePO4.
After seeing a lot on modular setups for mppt and inverters I decided to go with the all-one unit but watching the video I'm now concerned I screwed up because it seems fine for small...