Most reacted threads

I have a Macgregor 26s that is new to me and I need to start planning out Solar for it. Stock the boat only has three circuits, running lights, cabin lights, Anchor lights, I would like to upgrade the panel for more circuits (Wifi system, bilge pump, entertainment, maybe fridge). That being...

I've got a sailboat install. Using Grecell 200w portable panels and a renogy 40 rover controller. I constantly come back to the sailboat and the batteries (lifepo4 100ah x2) are discharged. If I connect to the controller, the panels input voltage but no current is flowing to the batteries. Today...

Hi all. I'm at the point in my garage renovation where the electricians is asking me for specifics on what I want as it pertains to electrical in the space. I want 240 over all so I can run a welder and have a level 2 car charger. I also want a generator connect that shuts power off to the grid...

Hi all, I have the current setup. Renogy Rover 40amp SCC Flexible panels - https://www.amazon.com/Topsolar-Flexible-Solar-Monocrystalline-Bendable/dp/B09B1HJZBR?th=1 2 Lifepo Batteries -...

I made this plan with Gemini AI. I have a garage apartment that is being finished. I will have room for about 10 panels on the roof. The apt has a subpanel connected to the main panel in the house. I want to be able to be able to use the solar to offset my costs. Batteries and a hybrid inverter...

Hello all, I am starting a project for a farmer in south Georgia (US). He uses a main detention pond to supply water for his irrigation pivots. He gets water to the pond through pumping well water out using 3 phase electric pumps. In addition is collects water in several ponds on the property...

I have something like one of these... https://www.defender.com/category.jsp?id=2290144&path=-1|6880|2290139 The way it is mounted it doesn't get much sun where it is stored. I want to add an auxiliary solar panel to it like this...

Specs: 200ah Lifepo in parallel - Renogy Lithium controller - Jupiter 1000w inverter I have the mc4 connectors running to the controller, the batteries connected to controller and no load as of yet but will be planning on putting a DC breaker panel to run some usb ports and some 12v DC...