Recent content by Cvantwout1

Thank you all! This was partially an issue with the bus bars and I believe partially the charge current setting. After charging the cells individually, I was able to get them up to 3.55 (when the charger was set to 3.6 - this is where the 10% charge end current setting is kicking in). I've...

Correct, I am top balancing in parallel. The charger can deliver up to 30 amps and I set it to 20A, but I was only getting 3.6A at the end before it told me it was full. At o At one point, it was able to deliver about 9A, but it gradually decreased. Charge voltage is 3.6V The charge leads...

Thanks Bob, very well could be. I set the termination voltage to 3.6v and the charger was showing a charge voltage of 3.55 - 3.6, but the DVM i have never read teh terminals being above 3.33 on the terminals of the cells

Hey guys, I recently received a set of 4 varicore 280AH LiFePO4 cells, but after charging with an icharger 306b, it keeps telling me the batter is full at 3.3V. What am I doing wrong here? Are these cells grade B and hence not going up to 3.6V? Thank you in advance!