Okay thank you for that. When I loaded the pcbs, I pulled the batteries straight out of the charger all of them were at 4.2 volts. When it was all put together and I checked the voltage it was at around 29.4 volts or there about. So with a 60-amp BMS, what would be a safe charge rate? 5a 10a...
I just put together a 24 volt battery. It consists of 24 7s PCB's loaded with 18650 batteries stacked in 4 Towers of 5 PCB'S and one Tower of 4 PCB'S. It has a 60a BMS. I will mainly be using this as power storage to charge my power stations. My question is at what voltage is the battery fully...
The cells are LG MH1 INR 18650 lithium ion batteries. The chargers that I used were the zanflare and the xtar VC8 which I believe both Discharge at .5c Took about 13 Hours. I appreciate your reply
Yes, Total beginner here lol and I was never good with math lol, It looks like they have a Max charge current of 3.1 amps and a standard current of 1.55 so ...1.55x24=37.2a?