we just bought the mtr hm we would be running small tv possibly the convection oven on occasion and the microwave. the frig is 12v norcold runs on propane.
thank you for the reply ..so i have 50 amp ANL fuse i plan to install from the wire coming from the panels to the controller will that work? than i plan to of course instal disconnect switch before and after to controller and out of controller. than another 50 ANL to the battery bank and than...
That is awesome. Well i got all set to knock this out this morning but always a but. So there was existing older panels and i removed all of them and was some existing wire couldnt get a size on it but when i cut it to put connectors on it was 14/3 110 wire and what they did was strip all the...
ok thank you i ordered the fuses from amazon will not use the 50 amp anl. the breaker i have is cheapy so i think i will not use it. the location i mounted the panels is open i think the only shading would be from trees etc. so with the 4 GC2 6 volt batteries how many amp hours would that give...
the rv frigs use some 12 v for the frig to run. but mostly will be run on propane. was just curious what size system i would need to run the compressor frig and keep battery bank at decent level. how many amp hours are the GC2 4 6v do you no?
thanks
So i had old PVM system they had 1/0 for negative connected to lugs on the old controller and #8 for the positive.Well i plan on putting a switch before and after the controller question is what wire size can i get away with to connect to the controller? I have 10 coming into controller. also...
great thank you! as far as the fuse for the inverter i was told i need a 250 amp looking for one i can bolt to the battery itself than to inverter cable. i see on amazon 250 amp stud mount fuse 32v will that work for my application?
thanks
I have wired them in parallel. I have mppt 40 controller wiring is less than 10ft form were i will mount controller. The controller is acopower my40. The mtr hm already has a 2000 watt inverter i plan to fuse before the controller after and at the inverter wire coming into the battery bank. i...