Deleted it and volts went back up to 67v but now at 2.1 amps? Does my meter not read DC amps? The solar inverter reads the same readings as my multimeter.
I have these panels (5) and they only put out 400 watts total? About 1-2 amps each panel, not sure what’s happening. Same measurements for each panel in the sun.
Works when plugged into AC but only goes into bypass mode? Manual talks little to nothing about bypass mode. No DC to AC is being inverted too just bypass my house?
Thanks Matt!
If anyone is interested in this Eco-Worthy Hybrid Inverter and want any info from it, message me.
I just wanted to test for PSW so I can run my computers :)
Hi, I’ve been through my settings over 10 times and read the manual 10x…
Can anyone point me in the right direction as the output is only 4v. It used to work but in bypass mode stealing power from the grid not the battery.
If voltages should be set up right too, not sure why the inverter...
They measure 1-2amps at the panel at 30~volts.
2 Series of 2 panels each series wired parallel into the inverter (using combiner box/fuse/breaker).
5th panel is wired in parallel.