Most reacted posts

Yikes! In retrospect the title was probably not correct. Off-grid implies no grid source power (to me), and that seems straightforward with components. Introducing grid source power (but not back-feeding) complicates the picture significantly. Doing that with components seems quite complex. I'm...

I am looking for an AIO system that will power the load from both utility and solar power when solar power is present but not sufficient to power the load independently. I do not want the system to switch to utility only on cloudy days when the solar can only power part of the load. The manuals...

I am considering purchasing ~20 used panels. I'll need to transport them ~70 miles and I would need to rent a truck or van. 1) What's the best way to safely transport the panels? 2) Position them vertically or horizontally? 3) Place something between adjacent panels? 4) Other precautions? Any...

It seems like it would a challenge to balance the components to produce SBU. Typical diagrams show the battery connected directly to the solar charger and load. There also needs to be an A/C charging/load source for times when neither solar or battery produce enough power. I did not see a video...

The All In One systems provide an SBU mode for powering loads that incorporates solar, battery and utility power for the load, in that priority. If you build a system with separate components is it possible to duplicate the SBU mode and use solar, battery and utility power?

I recently purchased an MPP PIP 3048 LV-MK. I am testing it with a continuous load that currently exceeds solar output most of the time. The inverter appears to be charging the battery from solar in SbU + SLb/UdC mode when the battery voltage drops to the "back to utility" voltage (program 12)...

Very helpful - thanks much!

I am considering something similar - e.g. a subpanel fed from solar+inverter in SUB mode without batteries. My question and concern is what happens if the solar array produces more power than the load? Does the inverter shut off and feed grid power to the subpanel? Or is the inverter able to use...