Most reacted posts

I'm not really sure since I have actually never used one before. when i google searched for "led dimmer resistor" I see one being sold that is 10K ohms (which will pull about 1 watt). And it appears that the Lutron may actually be a "0.47uF X1 310VAC rated capacitor" according to amazon...

Jim, I dont' know if this is relevant or not, but I have seen this behavior before with some LED bulbs when used on line power. Some leds dont like to be the only load on a circuit. Has something to do with the fact they are diodes, and some bulbs require a small load on the circuit. I...

These output time period settings would not set by using the website, however they did work by using the shineapp from my phone as instructed above. However, I was hoping this setting would switch to and from bypass mode at the set times, but it does not seem to be doing anything. Perhaps it...

Cool. seems like you have it figured out. If your interested in the Lutron resistor, they are about $5. Just search google for "LUTRON-LUT-MLC". From my experience, I tend to think the bigger brand LEDs like Halo & Lithonia provide the best power filtering and have the best results with...

Thanks for the reply. I now realize that Bussman doesnt even make a 200A version, but Tocas does offer a 200A breaker (which you mentioned) which is the only option that I know of. Unfortunately the Tocas 200A breaker is not marked or approved with any certifications. MIdnite does offer a...

Does anyone make a quality 200A DC breaker? I can't seem to find anything other than the Bussman automotive breakers... And It looks like Midnite doesnt make a 200A breaker...

I recently noticed someone made a video confirming that their Daly BMS does have functioning and adjustable temperature cutoffs.