Most reacted posts

Thanks You so much,I changed the switch to disable and now up and discharging good,thank you guys I'll be around???

Hi I'm new on this and trying to do my best, I have a JBD BMS 200 amp,my problem is after a charged my battery to 53.6 the bms start discharging them,i don't know why,I'm going to post some pics so you guys can see and try to help me with it...Thanks from Dominican republic

sorry they're not a secret,the thing is that I set them up like I saw in some youtube videos ,if you have some setting that works I'll change them,remember I'm new dealing with this,any advice will be welcome..thanks

but you think my settings are correct and another thing i only can charge the battery at 5 amp,what do I need to do to raise the amp charging??

sorry but i don't have any idea about if the cells are settling

I did it,it went to 0 amps but after i turned it on again discharging at 1.02 amp=54 watts

This is my setting

Thank you so much,I did Exactly what you said, I charged the batteries at 54.0v and it worked perfectly,the discharging stopped Now the inverter is working good....

Thank you so much..

Hi I'm new to the forum I am having problems with a JBD BMS 16S 48V, my inverter is a 48v growatt, I only use it from the electrical network further on I would use it solar, it is a project the jbd bms doesnt want to discharge,there's not way that i can turn on the discharge button on the...

Hi the settings I think it might be good so far,the cell voltages is 3.3