The sleep mode is useful and there is no reason to turn it off. In a practice a battery is sometimes connected to some load but sometimes not. When not connected, the sleep mode turns the interfaces off. If you wish to read your battery state when sleeps, just turn some load (light for example)...
Don't worry. The BMS or interfaces are in a sleep mode. If You can get current from battery, the BMS works and just start charging for a few seconds. The both interfaces (BT and UART) wil wake up. When get a communication you'll be able to set a parameters.
A many manufacturers declare a false solar panel power - that means theoretical values: max Voltage without load x max shortcut Current. When we talk about usable solar output power we expect max voltage at full possible current at solar panel output. But in practice, as the load increasing the...
Hello Marten,
I have a Daly BMS 12V 100A and two differrent experiences:
- with one battery package 280 Ah, Daly BMS works well. When charging with a 30 Amps charger Daly BMS is able to balance each cell with no more then 6 mV difference. When discharging the cells are well balanced also
-...
May I know what is the purpose of balancing when battery is not charging ? A balancing is an additional battery discharging isn't ? Why to discharge a battery more than necessary ?
A balancing when discharging is an additional battery discharge. Why ? Set the lowest limit for any cell and discharging will stop. When charging a cells will be balanced.