EG4_Eric's latest activity

Make sure you unzip the file by right clicking and selecting "Extract all"

EG4 has an automatic updater dongle that has the latest firmware (3.37) for the Lifepower4 batteries. This allows you to update the...

Yes, that is the correct cable.

Feel free to dm me.

I would recommend disconnecting the batteries from the 2nd inverter and testing the battery terminals on the inverter for continuity or...

Admittingly I've got the newest EG4-LL at the bottom of the rack assigned as #5 in the series. I'll get this switched around ASAP! Thanks!

Was there anything out of the ordinary when this happened or any changes made prior to this happening?

This shouldn't be an issue. Like Adam De Lay mentioned you can have as many batteries connected as you want. The only thing is the...

So, you have had them running fine until this happened? Also, did you get any error codes on any inverter?

Using the 4kW generator should work as long as the load does not exceed 4kW. However, it is highly recommended to use a generator within...

I would recommend checking the voltage between all the batteries and making sure they are all within 0.5V of each other. Also, try...

Hi again! Colten is with EG4 but @EG4_Jarrett is taking care of it and making sure everyone has consistent information ☺️ I will touch...

Have you checked the voltage from PV to see if you are getting any power? Also, have you checked the voltage on the batteries?

You want to make sure you don't double land on the terminals and that is why you need the external bus bars. It would be something...

Yes, they should work fine. However, it's important to remember that price often reflects the quality and longevity of the product.

Here is a diagram of one way you could connect the chargeverter to your system.

Yes that is what I figured, I will be setting up 8 in one string, but may just run a few test for fun after I have it all done.. I am...

Feel free to reach out to me if it doesn't resolve the issue for you.

The main reason is you wouldn't want to be too close to the minimum required voltage per MPPT. A cloudy day could drop the voltage below...

I would recommend installing a dc breaker when installing the system. Although the 6000xp has a PV on/off switch, it is still necessary...