When working with the 6000XP and the minimum 200Ah battery bank recommendation is met with all paralleled inverters, it's important to set the appropriate discharge current limit, especially when multiple inverters are paralleled.
For example, if you have two 6000XPs in parallel with 600Ah...
1. Check Dongle Type:
- Ensure you have an E Wi-Fi dongle that typically starts with BJXXXX or BGXXXX. A BAXXXX dongle will not work with this guide.
2. Access EG4 Monitoring Portal:
- Navigate to the EG4 Monitoring portal.
- Locate the Dongle section of the website.
- Ensure the...
EG4LL-S batteries can be smoothly integrated with other EG4 48V models to enhance your energy storage capabilities. To guarantee seamless functionality, it's crucial to follow a few important steps.
MultiPack Firmware: Firstly, it's recommended to have the MultiPack firmware installed. This...
When seeing sporadic behavior with the readings on the monitoring system like this:
Make sure to look at the time zones selected on the monitoring system for your station, user account, and the time displaying in the maintenance tab. If these do not match, you can see readings like the...
With the 6000XP, 12kPV, and 18kPV models, the MPPT inputs are equipped with reverse polarity protection to prevent damage in case of cross-polarizing the PV inputs. If you are experiencing no PV voltage, follow these steps to determine if the reverse polarity protection is active:
Confirm Array...