Recent content by EHay

Looking at the OP his batteries are fully charged before the solar input is 9k. Since the inverter can only send 9k to the grid, if you have 12k of panels that extra 3k is totally unusable at that point. The inverter has no place to put it. By slowing down the charge the batteries are still...

@DougfromdaUP : You right about the 1C, had to go back and look at Spec sheet. It says 100 amp constant charge, but 30 amp recommended. That is what I went by. @DIYrich : I set Max A charge to 37 amp to limit solar charge. Grid charge is set, but the way it's setup it does not charge...

- limited to home - solar sell - load first Solar goes to load first, battery, then grid. All excess power goes to grid. I do use TOU with 50% State of charge and Charge from grid turned on. It does'nt charge batteries from grid just maintains a minimum level, except last night with the...

I have struggled with the same issue. I get a little above 9kw on a full sun day not matter what the settings are. The only time I achieve more is when it's partly cloudy and get the halo effect/refraction from the clouds. About 11.2kw is the maximum I have ever gotten. Which is good...

Anyone having issues with the Sol-Ark 12k using a EG4-LL V2 as master and Lifepowers below that? I have been running 2 Lifepower4's for about 6 months open loop and was excited to see Signature Solar made the EG4-LL V2 that would allow close-loop communication between the inverter and the...