Most reacted posts

No dumb questions. The generator is attached by 15A extension cord to an inlet on the outside of the house. This inlet is wired to the house panel. I assume that this is then wired, plus fuse, to the inverter AC input. But I would have to check! Will report back next time I go up. The...

Thank you for this detailed and thorough reply! I managed to get the inverter to accept the generator by plugging in a 900W oil heater. That’s a win in winter because I can use the heat generated. I don’t have all the gear to visualise the waveform unfortunately. Also I contacted the MUST...

OK I have purchased five 60W lights so I can titrate the load needed. I own a multimeter that does frequency as well. It will be a couple of weeks until I can check if this works. Will report back.

Setting APL didn't work.

I tried five 60W halogen light bulbs for a total of 300W but it didn't work. I tested my multimeter at home on grid supply: 233.0-236.5V, 49.96-50.01Hz When testing the generator, the voltage remained within 1V of 241V with no load, and with a range of loads. So all good there. However, the...

That sounds about right. APL is the one setting I haven’t tried. Another thing to add to the troubleshooting list! Thank you!

This does sound like a viable solution. Can the independent charger be operating while the house inverter is attached to the batteries and potentially charging them as well via solar? Or would I have to isolate the house inverter from the batteries (and have no power to the house while charging).

Unfortunately, I don't have the original manual and I can't find a copy online. I have emailed the company but no response as yet. Without the manual the inverter settings are somewhat cryptic. One setting is [03] UTI : 30. I believe this is the utility charging current. I've tried...

Hi I'll try that forum thank you. I don't have the manual which is a real issue for me. The house inverter isn't that new. The generator has an inverter which I thought would be good but may have just made a purchasing mistake more expensive! I agree it may be underpowered for a 5kW...

I’m having trouble getting a stable connection between a 3200W DeWalt petrol inverter generator (DXIG3600) and Must hybrid solar inverter (PV18-5K MPK). I have an off grid solar setup with 48V battery. Most of the time I have no need of the generator but it is for when the batteries run low...

Hi, Thanks I have seen that manual however it doesn't match my inverter settings unfortunately. On my inverter setting [02] reads SNU 60, which I'm guessing means solar and utility charging, max 60A. Setting [01] reads UPS, with other options for this setting being FL and PO. I have no idea...