This is only supplied by SS for the EG4 life power plus 48 volts. My question is whether you can also get this for an EG4 Life power plus 24 volts to allow it to communicate with a victron system.
My PV is tied to the output of the Quattro and is 2500 watts
The EG4 has built-in BMS so I filled in the ESS assistant with lithium batteries with external BMS
the strange thing is if I manually switch off the grid, the inverter will go into inverter mode, but I need the grid if I demand too...
I use ESS self-consumption so if the solar power is too short it will switch to the battery and if it falls below the soc it will switch to the grid, but with me it will continue to use the grid and will not automatically switch to the batteries .
I have also tried the AGM settings but no...
So if I switch off the solar power, for example, it has to go to inverter mode, but it continues to use voltage from the grid
But when I turn off the mains voltage, it goes into inverter mode
Correct, I have installed this full setup, the problem is that the victron does not recognize the bms of the EG4 life power 4, so there is no communication between the batteries and the ESS system.
I have changed it to optimized without battery life but it remains the same as soon as I turn on grid voltage it immediately sees that as main and switches off the inverter
Who can help me with the correct settings
When I switch on my Victron Quattro it starts up in inverter mode but after 15 seconds it switches to main and uses steam from the grid
During the day with solar power, it charges the batteries neatly and returns the rest to the grid, but in the...