Wow, thanks for your incredibly quick reply. I've looked into the first option, but haven't found anything, maybe someone else has found a solution. I figured that the JBD would be my go to BMS and I probably/certainly replace this 'bad behaving' Daly BMS. Your remark concerning the adjustment...
What a perfect solution you created Louisvdw! I got it running now for 2 months now with a Daly BMS and it's a very good solution.
My current system consists of a 280Ah 48V Eve Battery with Daly 250A BMS connected via a Victron smartshunt to three Multiplus II 3000VA and two SmartSolar MPPT...
@towatai : Thanks to your information I have the feeling that the Daly is performing better, if it stays that way I'll keep it and add an active balancer (any suggestions). But I still need an additional BMS for a second battery bank... for which I'm looking at JBD...
Perfect a Daly expert! Well I have connected the Daly a couple of times with the BMS monitor V2.1.2 and v1.2.8 to change the SoC and I also tried to increase the sleeptime (in parameter settings) but after a read session it was still on 3600 s. The Hardware Version is BMS-GD230-309e my current...
Well, I'm currently looking for a JBD BMS with 200A 16s with both UART and RS485, but it's quite difficult to find the differences between their types. I found one which has active balancing the DP20S004 and some others like the AP21S001, the AP20S006 and the DP24S002? Does anyone have some...