diy solar

diy solar

Most reacted posts

  • Post in thread: Lithium Valley Batteries

    Over at another forum dedicated to boats, a couple people have used the Lithium Valley batteries and recommend them. I guess there is a dealer in either Singapore or Malaysia that has been selling them for a while.
  • Post in thread: Unexpectant disadvantage converting from 12v to 48v??

    It might be just the Renogy unit being buggy. Will had issues with it and didn't like it on his YouTube review of it. I wanted one also because they list it as marine. To my knowledge it is the only marine rated all in one. I have avoided it because of Will's experience with it. MPP told me...
  • Post in thread: All in One 48V Marine systems

    I was hoping you would get some answers as I have the same question. MPP told me they will have a marine one in mid July. I cannot get Growatt to answer me.
  • Post in thread: Parallel for double amp draw?

    I was under the assumption that parallel only doubles the ah and not the draw. Does it also double the draw capacity. Example. 280ah battery at 1c can draw 280 amps. 2 in parallel would be 560ah. Can it now draw 560 amps?
  • Post in thread: Lithium Charging w/alternator

    That battery linked by the OP is L-ion. Not a great idea on a boat. Lifepo4 is a better option. That supplier also has those banks but are currently sold out I believe
  • Post in thread: Parallel for double amp draw?

    So as a follow up then if I am running 4s2p with 280ah cells, is that still 560 amp max draw?
  • Post in thread: RV Battery bank advise or opinions

    I got 280ah Lishen and they are good so far. Looked brand new when I got them, QR codes clean etc. Buddy of mine ordered from same source and they only had the 310s. 310s came in swollen and QR codes hidden by black top cover tape stuff. He peeled it off and QR code scratched off. These...
  • Post in thread: Running 2 x 24v battiers vs 1 x 48V

    Can I run two 24V packs with BMS on both in series to get to 48V or should I just do 1 x 48V battery? I have two 24V 300 amp BMSs and no 48V one. I am not against running a 48V one but it's just a waste of the two 24V ones if I can just run them in series. I am not sure if the two BMSs behave...

diy solar

diy solar
Back
Top