Most reacted posts

Thanks everyone for your suggestions and support

No, am still looking for a way to charge the battery, because i don't have a stable electricity in my region, that's the main reason why i get the system so that it can bridge the gap. Am at work now, when i get home, i give you feedback on the battery.

Yes, I ran some load, if i minimise the load the battery will charge, but if i run full load the battery wont charge, i think i have to add some panels

MAX VoC is 102v MPPT 40A

Ok i do that as suggested

Please help with this

This is watts not volts, 62.7V 89watts

Thanks so very much, i will follow the instructions, and update you later

Good day everyone, Am new here. I have a 2400watts 24v hybrid system 2 300watt solar panels 2 130AH batteries Specs: Inverter: SOLAR CHARGER & AC CHARGER Solar Charger Type MPPT Maximum PV Array Open Circuit Voltage 102 VDC Maximum PV Array Power 1000 W MPPT Range @ Operating...

The battery is brand new At noon the panel produces over 200 watts, 8 -10A, over 65v according to the inverter display, its doesn't stable

Please like how many panels can i add, because the charger can only accommodate 1000watt, and maximum 102vdc? And i have initial 2* 300watt panels

No i don't charge individual, i just connect the battery together, the connection is properly connected with high quality, battery connected with 4awg as recommended by the inverter manual

Can the solar arrays charge the battery?

i bought the system

The inverter has 2 versions: PWM and MPPT, pwm max VoC is 80v while the MPPT is 102v which is mine

Howdy, Here are what am getting from the system with the timestamp, please is everything alright or the panel output is not accurate? e.g. The watt that am getting from the two panels I think am supposed to get more watt than what the system display. I have 2* 300watts but am getting up to...

What about the maximum pv array power which is 1000watts

Yes, i did it this morning, am getting 13v on each battery the meter don't add decimal point, so i don't know maybe its 13.** but they both give 13v each, and on the inverter am getting 26.8 to 26.9(fluctuating) and 2A from the panel. Without load the battery increase from 26.2 to 26.9.

I don't really understand what you mean, is there a way i can get those info you mention above

Please check the attachment below maybe is what you are talking about,

The inverter is an hybrid inverter, the spec is posted above

The battery is no more charging. I get 27v on my battery, 78.2v on solar panels

In the inverter manual its was recommended 2 parallel and 2 series, max VoC 102volts and 1000watt 40A