SUN 2KW Grid Tie Inverter, 220V, need 2 CT sensors in series clamp to 2 phases 110V each.
The breaker panel is down in Basement, need extension cable, happen to have 2 pcs AT keyboard extension cords. Anyone old enough recognize those plugs.
Total length is over 30 feet. Seems works fine.
When...
Hello, everyone:
I have 100W X2 Renogy panels(RNG-100D, used), I use them to charge my 12V LiFePo4 (100A) for Aux pump (12V). I use MakeSkyBlue MPPT V118 for test them. (Battery type, Li, charge Voltage 14.40)
With single panel, shows Voltage 20.31, Watts 46.16, it is ok. (here in New York...
Hi, think about this idea for a while. Use the Car alternator directly charge the LifePo4 is a NO GO, damage the battery and burn out the alternator.
But how about put in MPPT controller on it?
I have a spare MPPT controller, it has function limit charge current. If I set the charge current...
This is my small project, got 8 pcs used CALB cell (100Ah, test them got 70-80Ah), make the 12V banks for 12V pump to fix underground water problem.
So, the 12v bank has about 150Ah capacity, I can put on 100W x 3 panels in serials for it. However, seems like the controller will not pull out...
Got 6 Trina 340W Panels, think about put them together to 2000W Inverter (output 240V).
here is Panel's spec:
Imp 8.9A
Vmp 38.2V
Isc 9.5A
Voc 46.2V
the Inverter input is 45V - 90V. the Best I can do is 2s 3p, if 3s, will exceed the input Voltage. The Voc is 46.2V, so if 2 panels in series...