We don't know who they are, and since they've been deleted, we don't want to guess who they are and what their purpose is. We just want to let everyone know that Luxpower is focused on working hard to make good products and services, and there is no risk in cooperating with Luxpower.
Declaration
Recently, Luxpowertek issued a statement with regards to the contract dispute between Ningbo Hua Yu and Luxpowertek. This is the outcome of the court case mentioned in that statement.
The Yinzhou District Court of Ningbo City has ruled in favor of Luxpowertek in the first instance...
Obviously, this post did not come from Edwin of Luxpower, but someone maliciously pretended to be Edwin of Luxpower, so it was discovered and deleted by the administrator.
Fortunately, we got a fair ruling from the Chinese court before the RE+ exhibition, and we will focus on technological...
so 90A, that's 21.6k solar ac couple?---Yes, you are right.
and how do you ENABLE OVER FREQUENCY DERATE on the inverter?---you do not need to enable OVER FREQUENCY DERATE in our hybrid inverter. If your grid-tie inverter has this function, you need to enable it on your grid-tie inverter side...
If others registered the wifi dongle, you could not register again. Please write an email to info@luxpowertek.com and send your wifi dongle SN , we will help you.
hi Friend,
Luxpower inverter is not compatible with PCE lithium battery. it is not only hardware connection but also protocol. Different batteries have different protocols.
Hi everybody, this is Grace from Luxpower, we are going to have the roadshow in May, and we are looking forward to meeting you there,
https://luxpowertek.com/roadshow
Meanwhile, we will try to answer your technical questions here as many as we can
Obviously, this post did not come from Edwin of Luxpower, but someone maliciously pretended to be Edwin of Luxpower, so it was discovered and deleted by the administrator.
Fortunately, we got a fair ruling from the Chinese court before the RE+ exhibition, and we will focus on technological...
1.Now the lastest version is FAAB 0C0D
2. Which EG4 battery model are you using? I can check with EG4 engineer
3. For AC coupling
In the early stage, we designed AC coupling connected to EPS. However, we found it is better to connect it to the GEN port because you can disconnect the GEN port if...
Standby: this set will make the inverter just bypass AC to the EPS terminal to take loads
Smart load is another setting. When you have heavy loads and do not want to run when the battery is low, you can enable it and connects your load to GEN port.
Right now we do not have any authorized distributors in Ali. Technical support is very important, so we are working with local distributors to give a better technical support
Declaration
Recently, Luxpowertek issued a statement with regards to the contract dispute between Ningbo Hua Yu and Luxpowertek. This is the outcome of the court case mentioned in that statement.
The Yinzhou District Court of Ningbo City has ruled in favor of Luxpowertek in the first instance...
If the system runs well, we do not suggest you update it,
If there is anything abnormal, you can write to info@luxpowertek.com and please let us know
1. which issue do you have, so we can help to check
2. inverter SN
:)Your words make sense. Please write to info@luxpowertek.com for an update.
For default mode, it is self-consumption mode. Inverter will try to use solar and battery power, and avoid using grid energy, however, solar and loads change all the time, so it needs time to detect power and change...
yes, just send email and make it online, it doesn't matter what the model is, we will check which firmware is suitable for you
EG4 is quite familar with this LXP12K, I do not know your battery model by your description, so it is better to ask Signature Solar for a solution to communicate with...
The inverter you buy is a 3.6kW model, and it means output power is 3.6kW max. This is also limited by the certificate. We can't output more than 16A in UK. If you have 7kW from solar, after output 3.6kW to take loads or feedinto grid, the extra power can be used to charge the battery.
Now it is BAAA-1817. If everything ok work, then you will not suggest an update. I listed some modifications
BAAA-1817
2023-05-06
1. Modified Capacity definition in Dyness and Pylon battery protocol.
2. Enlarge charge/discharge current limitation from 66A to 72A.
BAAA-1617
2022-11-19
1...