Hi there,
Quote: Neither ISCr nor capacity fading occurs if the overdischarge is terminated before −12% SOC, where the first platform after the minimum voltage is located.
Unquote
I found this statement here: https://www.nature.com/articles/srep30248
From the above I concluded, that...
Through this forum I collected the details to produce, what I believe, is the correct wiring diagram for the B2A25S-RP: see KISS Relay a.pdf
The basic functions of the split port BMS with 500 A Relais are ok. However the SOC value and the cycle count are totally wrong. When discharging a 100%...
Hi,
the Victron BMV 712 smart consumes less than 1 mA.
Does anybody know, how much current is drawn during an alarm with the buzzer on?
Kind regards
Hans
Bug or feature? The JK-BMS can be set into its sleep mode by pushing a button for 5 Seconds. In sleep mode it's power consumption is close to zero. It also goes automatically into sleep mode, if a cell voltage drops below the "Power Off Voltage", which I set to 2.6 Volts.
By chance I learned...