Recent content by Helpme

Thank you for the advice. I have ordered the table I’m in communication with current connected service department to try to solve the issue. I don’t have communications established with my batteries. They are the new Bashan green those DIY boxes.

Hello! I am experiencing the same problem. Everything(batteries, panels, load out to braeaker Box), but no power to the loads? I have about 188v coming from single string of panels, my 3 batteries (15lw each) are 3/4 charged. The inverter is getting power both from the panels and/or the...

One cell or another was overcharging during when fully charged had to reduce high charge voltage. Seems to be working fine. I think the bigger deal is I have anxiety about it and am constantly opening up the trap for to go see if it has. I’m more of a set it and forget it kind of guy.

That sounds like a good price either way. I have found the Luyuan boxes and they will prepunch for whatever I need. I think 10 will be $3175 delivered. I was about to do the basen green boxes, and did order 1for a new complete system build for our shop. Using that new eg4 6000 xp for that. Yeah...

Also, I am assuming the Batrium is running the balancing and the Seplos is controlling the charging port?

And how much were the Seplos boxes?

Just to be clear, you have basically stacked the BMS’s to use the best portions of each? Love the way it looks, so clean and not wires everywhere, like on my frankenboxes. Finally have my Batrium running nearly flawlessly and the n the cat got in my area and pulled the com wire. Took me a minute...

Very nice! So, as a redo, would you spend the money for the seplos boxes, or get the cheaper boxes and use the system you already had?

I have both the Batrium core with k9s and JKs running. I have 4 k9s on one bank and 4 jks on the other side of the trip breaker. I’d rather be running some more of the Overkills as they are less of a worry to me. Plus, it’s about the solar power, for me, not wanting to constantly play with an...

Thank you sir! Wasn’t sure if there was something about cold weather coefficient blah blah blah(which usually means important and expensive not to account for) You guys are the experts in just a beginner

Hello Ampster. Thank you for all your help last year. I finally made my move on two 12k’s. I currently (pun intended) have 8@16s Eve batteries. 4 with a Batrium and 4 with XiaoxiangBMS.

On this same line of questioning, I am adding to my current array and I have 4 pairs of wire to my array. I have two Solark 12k’s and my 445 solarever have a VOC of 49.86. Am I safe to run a string of 10 on one mppt and does my other mppt on the same unit need to match?

He has not answered me.

Hello, any left?

Any left?