My guess your correct, because the manual recommends the use of ferrule ends which crimps on 3awg wire but the end is less in diameter, because it's solid metal, but even so I don't understand them recommending 6 and 3 awg wire when the wire from the same terminal to the inner workings of the...
Ya im not using solar assistant, im using ESPHome with modbus comms to see my data but im stiull working on writing the code to get all the registers in there and firmware version isnt implemented yet :(
Ok so I have run into a conundrum, so I need greater than 300a off my battery bank and would like a bms, and I know at those amps you need a Relay bms, but I don't like that you can't have independent charge and discharge on same port (I'm using aios) in this case would it be OK to hook up 2 fet...
Looks like it's supposed to dock 6-3 in LA, with arrival to me around 6-18, it's all on the container ship SEASPAN KOBE/10/E https://www.vesselfinder.com/vessels/details/9492701
Will update more when they arrive.
Also looking for 14x lf304 if anyone knows any screaming deals out there I don't...
I am in the market for 32 cells currently and another 32 shortly after, is the envision 304's from 18650 currently the best deal on reputable and good cells at 75/per
Ok so here is where I am at,, 32 Envision cells from 18650 for 2827, prolly get around Christmas ish, or 32 LF280k v3 which I hear are testing over 300, for 3078 from Jenny wu, China shipped would get probably around end of January, any thoughts, ideas, better deals?
Not sure I would buy these cells again, Great deal but shotty welding on the terminals, I had another one come off with very little force and you can see it was only half welded, and I haveba third that you can see is the same only half welded being held on barely by the other half but I am...
They are pretty close in volts and I am currently charging then up in series as they are in the picture and as soon as a cell hits 3.6 I planned to taper the current on the 48v charger down until its low keeping the highest cell at or below 3.6, then was gonna disconnect the bus bars and connect...
I actually have 2 of these dc house batteries and they tested over capacity and have been running perfectly for months now 0 issues, I was actually quite surprised due to the light weight of these things
Ya that's weird that they got away with that lol, certainly saved them money in shipping I'm sure but, it's definitely way heavier than 14kg, at a minimum at least double and I would say even more lol, this beast is a heavy bitch lol.