Most reacted posts

yes, and changed it to 12345

They are definitely happy at 16.8v fully charged, they are 4s3p configuration. 4.2v per cell.

The settings I attempted above wear for a different set of batteries I figured the controller was confused between 12 or 24 volts and I put in a 3s setup that was much closer to 12 volts. I am doing the configuration with Bluetooth and it is really not working

Well you can see that there is plenty of sun (69.6v on the panels) and battery is at 12.2v but charging is off. Should be topping it off to 12.6v as I have set.

I have a bunch of extra e-golf battery modules I'd like to use with my Renogy Rover. They are 4s3p LiPo chemistry batteries from what I can tell, which means fully charged they should be at 16.8 volts. I have a Renogy Rover 30a unit and the bluetooth module, but I can't seem to get the...

I cross-posted here: https://support.renogy.com/en/support/discussions/topics/35000017483?page=1 Seems unlikely I'll get support from Renogy.

Thanks for the info. I don't see settings for "absorption time". Do you know where I can find this? How are you setting via Modbus directly? I'm thinking that there is an error in the BT module and it isn't really setting all the stuff right, so if I can do it with Python or Node.js with...

Further experience here just shows that the USER mode just doesn't work. It doesn't seem to pay attention to the settings in there. I replaced the battery with 18650 batteries in a 3s6p setup and settings are just ignored. Anyone have a suggestion of a solar controller that really works with...

' My settings, set and verified to be set, but controller still claims battery overcharged and past 100%.

They are lithium, but not LiFePO4. Also perhaps not LiPo but not "pouch" batteries.