This is the setup, I’ve taken out the 12vlt wires. But even before that, the 60a fuse would pop.
What is a safe alternative fuse?
How do I drain power from the system to switch it out?
The cable sizes I am aware of (as I did not install) are 12 AWG and larger. If anyone is willing to help...
Hi all,
Purchased 2x 1000watt Renogy panels, Renogy solar lithium battery charger (12vlt and 24volt), the 24 volt output device and Bluetooth components. And through a friend who builds vans - got my entire system fitted. Here are some photos below. I’m working on a diagram now...
Here’s the way he attached to battery. One cable running straight to positive. It comes out the bottom left of the solar charger - goes to a fuse then onto the positive of vans (lead acid battery?) Is this ok?
The solar install materials used as per shop:
1) 12V 200Ah Lithium Iron LiFePO4 Deep Cycle Battery, Built-in 100A BMS, 2000+ Cycles, 280amp Max, Perfect for RV, Solar, Marine, Overland, Off-Grid Application
Quantity: 2
Price: $1511.42
2) Upgraded 300A 12 Way Blade Fuse Block Fuse Box with 2...
Does that wire terminate on the negative busbar? - yes, if you're looking straight at the round holes on front Invt charger, its the bottom left one (see diagram I drew out).
Is there a wire from the negative busbar to the frame? - There is a neg wire on Negative busbar going to body of...
The AC cord for giving 24 vlt has a plug for using higher power products for short periods.
The other AC cord has a three-prong end to plug into Shore power at RV park or power while parking in someones drive
Hey John, the only negative goes from the NEG busbar to the Van body ill try to post a pic; that cable only a couple of inches & bolted into the van steel frame. Then for the positive wire from the top right of Solar Charger heading to Van starter battery (with a cheap fuse in between), it...