diy solar

diy solar

Most reacted posts

  • Post in thread: 3 Lynx Power In for 12 parallel 100amp hour Battleborn batteries

    Yes each battery will have its own connection to the busbar and just under 500a at max capacity. I want this so I can isolate each battery periodically and check it. I've just recently had to get the original 8 replaced under warranty. Do you know if the length of the busbar will noticeably...
  • Post in thread: 3 Lynx Power In for 12 parallel 100amp hour Battleborn batteries

    Low voltage was the symptom with everything hooked up. This happened over time, when installed it worked fine for over a year. When I tested each battery for Battleborn, some would not wake up no matter how long I charged them, some would discharge 100 amp hours but wouldn't charge correctly...
  • Post in thread: 3 Lynx Power In for 12 parallel 100amp hour Battleborn batteries

    Here from the Wiring Unlimited is what Diagonally is. Previously 8 batteries were connected this way. Now I have 12 and will connect them individually and directly to 3 lynx power ins.
  • Post in thread: 3 Lynx Power In for 12 parallel 100amp hour Battleborn batteries

    I'm rewiring my setup my RV. Current system is 12volt, 2 Multiplus II's, 2,900 watts of solar and 8 100amp hour Battleborn batteries. Yes a bit large for 12 volt. I should have opted for 24v when I added the second multi and 4 additional batteries. Previously I had 8 batteries and were wired...
  • Post in thread: 3 Lynx Power In for 12 parallel 100amp hour Battleborn batteries

    Thanks for the tip. Yes buttoned down really well.
Back
Top