Recent content by jimT

Thank you! I'll update this thread once the test is complete.

One more question: should I power down the batteries before I do this? Thanks

Thank you for your response. The answer is "yes & yes". The rack I purchased had mounting holes misaligned but I managed to get at least one mounting screw in per battery. I will try the bonding wires, but is there a location on the battery to bond the wire to? This wire does not need to be...

I believe Issue #2 best fits my observations where at random times error 61 will flash/beep for a few minutes and then the system returns to normal operation. I have also noted two additional things: 1) this issue is happening more frequently, and 2) The battery charge led seems to flash at all...

Yes, one inverter and off-grid. I was looking through the user manual and cannot find any information about the internal N-G bonding. Can you point me to any literature on the subject? Thanks

Thanks for the suggestion. Earlier today I purchased this one: https://www.amazon.com/gp/product/B00UKG8WZE/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

Thank you!

Thank you for your help and I will watch the videos also. Some additional Info in case it modifies your response: 1. The panel is rated at 100Amp 2. The inverter spec state: 6500W Continuous Output. I assume that means it can continuously output 6500W (on demand). That would be 54 Amp at 120V...

I am planning to use only 120 V appliances in my cabin and I purchased one EG4 6500EX-48 for this purpose. This inverter will be connected directly to my main load panel and I have questions about this simple layout. The inverter and main panel will be located only 3 feet apart. Thank you...