Most reacted posts

Everyone thanx for the comments So… cable issues. It was a little part of me telling me this as i described. Making a closed loop as @HighTechLab described is a good idea and fast to fix. And give an insight where the issue is located. Between de batteries or between the batteries and de...

Update: making a loop in the RS232 communication between the SOK batterys dose not solve the (my) problem. See print screen. In the next days i will attack the inverter/battery cable by crimping a new shielded communication cable and installing it. Will keep you updated

Hallo Everyone, (especialy @HighTechLab ) I don't know if this is a common question but I am sure they are people or businesses out there that maybe have the same questions. So i thought to post the question here as reference material for everyone to see and the future questions. Ideea: I have...

Hello Everybody, Problem: After spending hours or searching in my installation and online i am a bit lost. Cannot find the reason why this installation (I have multiplel installations working) keeps showing weird anomalies in the data charts of the Online VRM environment. Anomalie like; -SOK...

First of all I would like to thank all the input on this form, for me especially @HighTechLab @Will Prowse @Off-Grid-Garage for there contribution on this form and on youtube. Keep up the good work so that we all can benefit from all of eachother input. (little bit starstruck when tagging them...

Thanx for the Quick replay, and sollution perfect. HHhhhmm i have to change the language of my intire windowns setup for one program. That is a bummer because it is alsow a fammely latop and englisch is not our native language. I am going to investigate this, maby use another windows profile...

@HighTechLab / Dexter: Thanks for the fast reply. Voltage control with a SmartShunt 2000A is a good solution. Our thoughts with the BMS communication was: keep track on the batteries health such as individually packed- / cell imbalances or errors and let them report via the VRM. If there is no...

Yes i agree @stromy . I also think is not worth the effort. Despite @HighTechLab meaning well. You have to be well known with this subject to configure the software but also the hardware right. Reading docs/form or any info about this subject in Englisch will be best practices in my opinion...

Update: 1- just in case, replaced all data communication cables in de RS485B and RS485C port with shielded CAT6 cables = No Effect 2- krimped a new data communication cable between SOK en Victron Cerbo GX with shielded CAT6 cable = No Effect :oops: 3- select an other masterbattery by selecting...

This was helpful, thanx for the awnsers and get well soon.