jsmithtx's latest activity

I addressed this here.

for monitoring. a new project so the code is still changing alot. https://github.com/HotNoob/InverterModBusToMQTT + home assistant. im...

You can use the EG4 app with the dongle, but the wireless dongle is very insecure. It broadcasts an open network that anyone can join...

It may be a DIP switch issue. I couldn't get my batteries to report when I had them in perfect DIP sequence (1,2,3,4)... I had to skip...

That port is explicitly for battery comms. I'm not sure it could be used for something else. That said, it seems to be a bigger pain...

I couldn't find the *inverter* RS485 connection anywhere else (there is a port for the *battery* CAN/RS485 but I am using that for my...

I'm still waiting on a refund after sending my ethernet dongle back!

Nope. I beat my head over this one. It won't. And it is because SA uses LocalConnect (port 8899) to get the data. That port is NOT...

If you want to make an RS485 connection to the 6000XP inverter, you will use two of the four wires that are part of the wireless/wired...

Ethernet dongle doesn't work with SA. The LocalConnect functionality doesn't work, which is what SA currently uses. That said, they are...

From what I'm seeing, that's a solid NO--quite the opposite, the most insecure possible. Well that's terrible. For half a second I had...

Jsmithtx , thank you for this post. I have 2 LFP4 and 1 LL-s . Just finished torquing the last connections on the inverter side and was...

Mine is wide open. You might check yours. This is why I went through the pain of trying the wired dongle, which also did not work. SA is...

I'll add that the wifi dongle is TERRIBLE for security. It continually broadcasts an open network that anyone can join and change the...

I might have been foolish, but I just replaced the Cyberpower lead acid batteries with equivalent LiFePO4 batteries. From what I read...

Seems odd. The LL batteries (if they have 6 dips) should be at setting 1; if there are 4 dips, it should be at setting "0". Have you...

Resolved. Turned out I had changed the top battery setting from CAN to RS485 and the communication with the inverter was incorrect.

Well, since no reply, I took the brute force approach... I send a modbus command to holding register 11 with bytes { 255,255 } and reset...

@EG4_Jarrett or @EG4-Jacob I also just tried using the wifi dongle and either received "set failed" (via localconnect) or "No...