Recent content by kamoe

My Growatt 6000T has given me 110V on both AC outputs (110v+110v) until recently. But now I only get about 90V on these AC outputs... any idea why this could happen?

Thanks for the reply.. I'll make that cable and put it between the Growatt and the battery. Same goes for the cables between the batteries I assume so I need to make a bunch.

Has anybody gotten the Growatt to communicate with these Hitachi batteries? What's the correct protocol? What could I have done wrong here? I'm having problems getting the communication working between my Growatt 6000T and my Hitachi ESM-48100B1 Lithium Battery bank. I have three of these...

The big red / black are obvious for the battery... and yes as I wrote, the only option I see is what you call adding a buck converter... not a very elegant solution in my opinion that as it bypasses the Growatt charge controller+remote monitoring system.... But might be the only way. I don't...

Hi I have a Growatt 6000T setup with 48V from 300 AMP LiFePO4 and so far all good. But where's the DC output? Well there's non and that puzzles me a bit. This inverter has outputs for AC 110v and AC 220-220V. I could make a direct connection to the battery output, that would give me 48V that...