Most reacted posts

Thanks for your input brothers, I only wanted to fuse the AC output side to protect from BMS from shutting down when I screw up and run a high wattage device because of my Alzheimer's or dementia (kind of like when I missed the MPP max draw and SOK battery output thing) or you can't fix stupid. ?

Howdy All, I purchased a MPP all in one 12v-1K, the max amp draw on it is 109 amps. I also had purchased a SOK 206ah battery a while back that has a max discharge rate of 100 amps continuous and 200 amps for 3 seconds (yes 3 seconds). Was wandering if anyone could advise on how to approach this...

I Have same or similar questions? In Will's Video he states no fuse is needed because the battery has a BMS of its own? Will also shows no circuit breaker with the AC connection and the MPP Manual states that the unit is protected (see #11 item in description of manual layout)? But then the...

Hey Bud, Thanks for your time, I'm fine with lowering my usage to 80/90 %, I was looking for way fuse dc input and throttle the ac load side, any ideas?

yes it is MPP Solar PIP-1012LV-MS?

Thanks Bud (y)

Happy Holidays All, In Will's Video he states no fuse is needed because the battery has a BMS of its own? Will also shows no circuit breaker with the AC connection and the MPP Manual states that the unit is protected (see #11 item in description of manual layout)? But then the manual states...

Sorry for late response, was in sierra's, thanks for your support. Maxx air fan has issues with voltages over 12, will be adding a regulator for the fan.

Merry Christmas All, and thanks for your response Will, and All

Which model fan? I see numerous complaints of this issue on google, youtube, amazon, etc. Supposedly, they are updating their circuit boards at maxair also? I have the 5100k model and don,t want to have to change the circuit boards out, Like your 6.5 year status! Thats a good fan.

Thanks for the response, the Renogy has a 25volt max and a 15volt min, maybe I should keep on looking??

Just a head's up All, Will doesn't mention on his website, that SOK 206 batteries that he recommends, have a max current output of 100 amps, which means you can't have an inverter of more than 1200 watts, unless you buy two for a parallel connection or use another device or design. I think he...

Howdy All, New SOK is reading 13.4-5 after first charge? is supposed to be 12.8, Wont LED Lights, fans, etc. in my van burn up at this voltage? any input would be appreciated.

In the product manual for the charger it states that "Solar charging will be triggered if the PV input voltage is higher than 15V for 10 seconds." Does this infer that : if you have two identical solar panels wired in parallel, with a VMP of 18.5 volts for each panel, and if it was a cloudy day...