Most reacted posts

EPEVER UP3000-HM10022 Hybrid Inverter Just Been through this exact same senario with Epever, initially contacted them about their output Neutral Ground /Earth bonding and after confirming its suitability i found out that infact when supplied by a Mains TNC-S supply( Neutral Earthing bond at...

I would recommend not to re- tin cable ends, the terminals are not designed for that as they are designed to clamp the conductor bare or with a Ferrel , for if you have another loose hot terminal with tinned conductor the solder runs out and makes the terminal hotter, i would suggest these...

I had a look at the Amazon holder and there was no data for that unit , so i checked Bussman which was similar but still very little , what this system relies on is surface to surface cable lug to tag connection, if there is little surface contact area or your not using washers to spread the...

Agree

Epever UP3000 HM10022 New to the site and I was going to start a separate post but i have done some research and i believe this Epever UP3000 HM10022 is a good option to buy and compliment a 280ah lipo4 battery pack , this is the product for lipo4 charging , it is also an all in one unit ...

This should be the time current curve for this fuse , to read it find your fuse at the top 300a approx marked in yellow , any current to the right of this curve will rupture the fuse, the higher the current the faster it will rupture, any current below or to the left of the yellow line is the...

DSSR20s are Electrodacus modules used with the SBMSO BMS, In regard to the solar charger yes , it gives me the chance to understand balancing and managing cells for my own information & learning , in regard to the BMS controlling the inverter yes, thats my understanding that the BMS will turn...