Here is my experince with big battery I ordered 4 24v power blocks and cable to make 48v. I was missing 1 serial cable I paid for and no one calls back to make it right. I messed up and destoried 2 BMS my fault but I need to pay and replace but no one calls me back after 4 phone calls. I have...
Yes I like that also. I can turn on/off the charger from inside my house without going outside. The app tells a lot of info. When I call Emporia with any ?'s they are very helpful. Being new with solar and now Ev's I'm learning what I can.
I made a mistake and blew up my BMS and need to know were I can get a new one it is for my Big Battery 24v LifePo4 battery pack. It is Battery Evo 2P085002 S/N 237200095 8S (24) 150A chip 3.2v LifePo4 Same Port with balance.
Thanks for your reply. That 1 is a 100a and I need 150a everything else looks good. I really need it to be the same brand as the other bms in my system I have 4 batteries. 2 in series to make 48v and the 2 parallel to make 2 48v batteries. That will also allow me to just plug in all the wires...
Anyone been able to connect to WIFI or computer via watchpower on the MPP LV 6548? I never had a problem connecting to computer on my MPP LV 5048 but the WiFI is not so great on the 5048 but it does connect.
Need to know breaker size for solar panel. I'm using 10 awg wire with 8 100 watt 12 volt connected togather for 48 volts. I bought a 80 amp breaker but I think it might be to small it hasn't popped so maybe it is ok. Thanks for any help. This all hooked up to my LV5048 system.
I received my charger today and installed. My Nissan leaf has 2 charging ports the J port only supports 110 at 1.4 kw and 220 at 6.6 kw and a chadmo port for 50 kw so unless there is an adapter I can only charge at 6,6 kw or less. I was hoping to charge at 11 kw that the charger can produce...
The MPPT voltage range for the LV5048 is 60-110 VDC. Are you saying your PV voltage is 48V? I'm so clueless I don't even know what you are asking me. LOL I needed to know what breaker size to use on the solar panel side. I have a 200 amp breaker on the battery side.
What breaker size do I need for the battery bank between and inverter. MPP LV 5048 I think the battery cable size is 1/0. I'm starting out small with 4 100 amp solar panels and 4 200 amp sealed lead acid batteries.
I just have 4 12 volt solar panels connected in serial to make 48 volts as required to run my MPP LV 5048 panel. In a couple day I will receive 8 more 12 v panels that will be connect in serial and then groups of 4 will be connected in parallel if that is correct.
https://www.amazon.com/gp/product/B07JXYTFF7/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 here are the solar panels I have bought they are all the same. I will go out and take a pic as requested. Thanks
I bought 2 year old (12) 340 watt 36V panels for $1200.00 with free shipping that is 4080 watts. 58 panels at 80 watts if I figured correctly is 4640 watts that doesn't sound like a good deal to me. JMHO
How is the Empor[a EV charger working for you I have the same set up as you 2 6548 mppt all in one. I bought a 2021 Nissan s plus and ordered the Emporia EV charger today
48 Amp Smart Electric Vehicle (EV) Charger/with Solar Charging and Peak Demand Management | Smart Home Energy Monitor with...
Watts ÷ volts x 1.2 = fuse size in amps required as a general rule. I found this on the internet so 5000 watt ÷ 48v x 1.2 should give me 125 amp breaker is this correct? The 1/0 wire will be 5ft or a little.
I need know the settings for my MPP LV5048 for 48v LifePo4 batteries. So far it looks like Boost charge is 57.6, Float charge 55.2, back to grid (unknown), back to discharge voltage (unknown), battery cut of voltage (unknown). Thanks for any help