Most reacted posts

I build a brand new system with 8 cells 200Ah lifepo4 and a Daly 8s 200A BMS. I tested everything and all was Ok. I had to load for activate the BMS and the bluetooth. I tested loading unloading. Switch off on full, empty, temp low, temp high everything works perfectly. So then i mount it in a...

It is a smart BMS. Thanks for the interesting link, it is very informative. My battery was working, but i have to deactivate to mount the cells and the BMS in the case by disconnecting the wires to the cells. After mounting the pack in a case i reconnected the wires to the cell. And as i...

Yes ist is the UART. On my BMS the Bluetooth plug only fits on one socket and this is the UART.

Hello experts! I am an electrican and have build several 12V and 24V LiFePo4 packages for boats and campers, so i have some experience with LiFePo4 and BMS. What I am thinking about is, if I can optimize the balancing to avoid putting all cells in parallel and wait until balance is finished...

Thanks for your help! The BMS works before i put it in the case. Daly requests me to do some videos to make it easier. So i put here also the links to the videos: 1. Checking the voltage to each cell at balance plug of the BMS: 2. Strange behavior with unpluged balance plug at BMS - i can...