MaikaiLife's latest activity

No problem. There may be some other specific things that I didn't account for that I'm unaware about your install, but genericly that...

Hi @SignatureSolarJess , could you please direct me to an EG4 resource knowledgeable about the topics discussed in the following thread...

Really? https://diysolarforum.com/threads/does-victron-make-a-5kva-inverter-without-a-charger.83437/

Washed the truck this morning and had some Dawn soap left so I decided to wash and clean the solar panels. Ground arrays are sure easy...

Your question is, do people in the DIY forums like Lithium batteries? The short answer is yes, they are the backbone of most solar...

Wiring a Van with inverters and batteries is quite a bit of work. I think you should watch some of the explorist videos on YouTube to...

Given your honesty of Solar experience you would need a Solar contractor/consultant to design and implement everything, which might...

Removed duplicate post

Solar Assistant uses some features such as the graphing tool that I’m pretty sure needs access to the internet. You don’t need to use...

Like John Deere putting chips in hardware that had no business with electronics simply so you couldn't replace the part with an...

Do you need 15 foot cable?

You will need a tool to test each one. Something like this will work...

The right to repair is about ensuring that manufacturers do not intentionally design systems or implement methods that prevent...

See the documentation on this page, you might not have the right cable or it's not detecting due to a bad USB port or some other issue...

Typically the USB Port gets filled in with some data when the cable is connected to a device and is detected by SA.

See the updated photo

Maybe this helps, this is the best I could find for a picture.

Page 26 seems to imply only 3 phases or a split phase is supported.

Are you asking about grounding the Inverter, or the panels? Both should be grounded. For the inverter, you can share the main ground...

Hi Tim, I used the wrong term phase vs leg, I've since corrected it for future reference. Thank you for the catch (y)