Most reacted posts

I set my supply to 3.50v and max current and let them balance to that, before upping the voltage to 3.65 until the current drops to close to 0 just as San wizard advises. The psu will start cc and then switch to cv when it nears voltage. Depending on start charge, It will take 5 - 10 days to...

Hi, What error do you get? I get a OV-Vbatt-H when it hits 100% charge, but up to now have ignored it as it clears and seems to have no effect. What settings do you have set? I am using ginl on the bms and pylon on the inverter. All others seemed to give batt name errors. Anyway it was...

How did you get the bms into home assistant? Using this integration? https://github.com/byte4geek/SEPLOS_MQTT

Can anyone tell me why my bms is hitting monomer high voltage alarm short of the configured value please?

Thanks for taking the time to reply. I don't think the settings are actually applying to the BMS. Do i need to do anything other than login as admin, and chose upload settings, then apply settings? I changed them all back to the original settings i had which were pretty much top limit for...