I want to keep to the Facts, first list inverter and battery, then what settings are you using, then comment if there is any issue with those settings.
If you dont have the settings for a LVX-6048 or similar inverter, please dont post commentary. System description first, settings second...
Is there a way to change the eg6500 to NOT go into bypass mode when the grid is on, and to only have it charge the battery.
Now, before someone says it, I dont want to buy a chargeverter. Why spend money on a device to do a function that the inverter should already be doing?So please just dont...
So while testing voltages and other things on the terminals I noticed this a while back. Even with nothing connected to the dc solar inut terminals, when the inverter is on there is approx 150v ac on those terminals. I find that very strange.
I have a customer who is experiencing this issue
The inverter is set to turn back to grid at SOC 20% and then kick off grid at 50%
The AUX output is used to control a 60amp power contactor, so even though the grid is on, the inverter does not have any voltage on the terminals in the inverter...