https://www.sorotecpower.com/products-detail-134126
not changed anything in the menu as yet, want to make sure it was working first
I have the 5.5k unit, its operating voltage is anything above 120 VDC so why nothing in pv display
MODEL
REVO II 3K-24
REVO II 3.2K-48
REVO II 5.5K-48...
Hi I have just installed one of these units and app output cloudy is around 160-170 volts, voc of around 180 from the 5 panels x 2 into 1 parallel, 36 volt panels but nothing is displayed as in from solar array. I measured the voltage on the input at the pv input so where is the voltage going...
Hi I have one of these units and was told that the AC in is also the AC out for feeding back to the grid or the supply where the AC in comes feom.
Is this the case?
I know there is an AC out, but what I am wanting to know is the correct way to attach the unit to my main fuse board.
In series? as...
I have bought a similar system to this
https://www.ebay.co.uk/itm/10KVA-Solar-Inverter-60A-MPPT-8000W-Off-Grid-Inverter-48V-220V-Pure-Sine-Wave/392883755516?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
only one off at moment though
Need some help with the array config
I have 15 panels as below to run a single one of this item
I have a bank of 4 190ah batteries which will make 48V
Panels
Open circuit voltage Voc: 36 V
Nominal power Pmax: 235 W.
Nominal voltage Vmp: 29.6 V
Nominal current Imp: 7.78 A
MPPT inverter
Model ISolar SML 5K
BATTERY&AC CHARGER...
It works as it should, I needed to watch the screen and not look at the app. I could see power going back to the grid at the unit, so if I only have one cable to the AC in, then power must be flowing back and forth via the AC in
Thanks for that, I am intending to add another 15 and another mppt in parallel to the mix also, looking to get more out of the system
Would you know what rated power solar charging means, the 5k model shows 4000W rated power and pv charge current at 80A
so 36Voc is the array without load...