Hello,
has anyone already performed a complete load test on the two cells?
would like to order with now 8x 280ah but I am not so experienced in LFP.
if i read the special fications this way i would think the lists are a bit worse. What do you think?
best regards
Max
Hello Steve
Thank you for your comments.
I have a system with electrodacuds and I am also satisfied.
Now wanted to upgrade my cells from 6 to 8 mm bolts because the first installation have shown 6mm weaknesses.
According to load table for aluminum 30x5mm should be enough for 320A
my induction...
But that would mean 6 x 25w =150W heating power, which is too high. Probably the load resistors would not withstand this in continuous operation. How can I simply limit the current?
I need maybe 20-30Watt heating power
Hello
Can I also just use aluminum busbars?
Are 25x5mm cell connectors for 12V battery 400A maximum load sufficient.
Or must I necessarily use copper.
thanks
everything has to be done via the SBMS0.
the technology must be simple and not another 2-4 BMS. if the inverter ever burns out. Then I will upgrade the system to 24V