Thanks for your efforts, more questions to follow. As the rs485 is being used with the supplied meter (I'm UK like you) . How do you access the other rs485 if you are using the com port with the WiFi dongle? Also do you have any pictures or pinouts of how you got the dongle to interface. I'm...
ok, went into node red, serial and clicked serial, and selected usb0... now looks as if the mqtt is not connecting? just a thought as it stays on connecting.
I’m looking to make a lipo battery 48v using this BMS, will this work with a Solax Su5000? I understand that pylontech batts work with this inverter.. what flavour would I need to buy? The Canbus or rs485? Thanks in advance
Anyone on here using Lead Acid baterries with a Solis hybrid.. I'm using a bank of 3 strings of 12v Haze 100Ah AGM batteries.(12 batteries) So 48v 300Ah...never mind what I set my volts low to, the battery bank stops giving output at 47V. These batteries apparently will deep cycle down to 11v...
@shavermcspud this is so awesome and perfect for my needs. I currently have a Solis 5g hybrid, going to install in a few weeks. I currently have home assistant running on a micro Pc, with influxdb and Grafana setup. Once I have built this pi using your fantastic image, I how do I set it up to...
so close yet so far.. all booted up, and connected as discussed. no data showing on Grafana . I have the wifi stick disconnected and I have connected straight into the molex, yellow and blue. AB to the same usb stick as you. i have tried all 4 usb ports... lsusb lists device as shown
further...